Rockbond Fairing Coat (RB FC)

Product Information Sheet:

Description

ROCKBOND FAIRING COAT WHITE (RB FCW) is a pre-batched, ready to use, two part fairing coat system consisting of a white cementitious powder and a pure acrylic polymer latex. ROCKBOND FAIRING COAT WHITE DRY PACK (RB FCW DP) contains a blend of cement powders, inert fine fillers, fibres, and a collection of compatible admixtures. When the dry pack is mixed with the ROCKBOND PURE ACRYLIC LATEX (RB PAL), a white, acrylic modified, fairing coat is produced which is applied in thin sections to skim over brick, concrete and stone. The system is very adhesive, flexible, waterproof and impermeable. The coating provides a protective, uniform and ascetically pleasing final finish to new construction work and concrete repairs. The material is supplied in 20kg/15 litre packs and has a shelf life of 2 years.

 

Special Properties

  • Pre-batched and ready to use.
  • Available in brilliant white, and also in a range of attractive colours.
  • Normally no primer is required.
  • The dry pack is quickly and easily mixed with the latex, applied and finished.
  • Can be placed by brush, broom, roller, sponge, trowel or spray.
  • Can be applied in sections of 1mm, and down to a feather edge.
  • Non-shrink, non cracking, non crazing, non curling and shrinkage compensated.
  • The coating is adhesive, flexible, microporous, damp proof, waterproof and weatherproof.
  • Water “soluble” – equipment is quickly and easily washed and cleaned with water.
  • High yielding, economical, non flammable, non toxic, odour free, user friendly and safe to use.

Uses

  • For re-facing brickwork, blockwork, masonry, stone, concrete and cementitious renders.
  • To fill, seal and repair imperfections on building surfaces, honeycombing, cracks and crazing, pores, voids, ruts and holes.
  • To produce a waterproof coating to offices, factories, warehouses and buildings.
  • To protect cement, concrete and stone against atmospheric pollution.
  • To produce a uniform, complete and cosmetic cover to concrete repairs.
  • To give an attractive and ascetically pleasing finish to walls, buildings and concrete structures.
/by

Rockbond Render Coat (RB RDC)

Product Information Sheet:

Description

ROCKBOND RENDER COAT LIGHT GREY (RB RDC LG) is a two part protective, flexible coating system consisting of a cementitious powder and an acrylic polymer latex. ROCKBOND RENDER COAT LIGHT GREY DRY PACK (RB RDC LGDP) is a blend of special cement powders, graded sands and a collection of admixtures, and when mixed with the ROCKBOND PURE ACRYLIC LATEX (RB PAL), a light grey render is produced that is easily applied by trowel or spray. The hardened material is highly adhesive, resilient, waterproof and durable, and provides a protective and attractive coating to brick and concrete. The render is supplied in 20kg/12.5 litre pack and has a shelf life of 2 years.

Special Properties

  • Available in white, and also in a range of attractive colours.
  • The render is quickly and easily mixed, worked and placed.
  • The coating is extremely adhesive and resilient.
  • Non-shrink, non cracking, non crazing, non curling and shrinkage compensated.
  • Can be placed in sections of 25mm to a feather edge.
  • Weatherproof, waterproof, damp proof and microporous.
  • Resistant to acid gasses, carbonation, frost and freeze/thaw cycles.
  • Will readily accept a dry dash pebble finish with minimal rebound.
  • Water soluble – tools and equipment are quickly and easily washed.
  • High yielding, economical, non flammable, non toxic, odour free, user friendly and safe to use.

Uses

  • To render cement, concrete, brickwork, blockwork, masonry and stone.
  • To repair and protect weak or damaged concrete, brick and stone surfaces.
  • To produce waterproof and durable coatings to external walls of offices, factories, warehouses and buildings.
  • For use as an anti-carbonation coating to cement and concrete.
  • To produce attractive and ascetically pleasing finishes to houses, buildings and concrete structures
/by

Rockbond Flexible (APFC) Membrane (RB FM)

Product Information Sheet:

For use as an Anti-carbonation Protective, Flexible Coating to cement and concrete. Whenever stress, thermal or moisture movement is a problem in a concrete structure. Tanking, roofing, weatherproofing and waterproofing applications.

Description

ROCKBOND FLEXIBLE (APFC) MEMBRANE (RB FM) is a two part elastomeric, Anti-carbonation, Protective Flexible Coating.  The dry pack, ROCKBOND FLEXIBLE MEMBRANE DRY PACK

(RB FM DP) is a blend of special cement powders, graded sands and compatible admixtures.

When the powder is mixed with the ROCKBOND FLEXIBLE LATEX (RB FL), a light grey coating is produced which is extremely adhesive, flexible and waterproof.  The membrane waterproofs and protects concrete against carbonation, acid gases and chemical attack.  The material is supplied in 3kg/2 litre or 15kg/10 litre packs and has a shelf life of 5 years.

Special Properties

  • 2mm of Flexible Membrane provides anti-carbonation protection to concrete equivalent to 50mm of good quality concrete!
  • Available in white, and also in a range of colours.
  • Easy to mix and apply by trowel, float, spatula, brush or spray.
  • Adheres strongly to all construction materials: cement, mortar, render, concrete, masonry, brick, stone, steel, wood, plastic, fibreglass and glass.
  • Provides a permanent waterproof bond to concrete in situations where there is a positive or negative hydrostatic pressure.
  • Microporous, waterproof, weatherproof and impermeable to aqueous solutions and liquids.
  • Elastic: will flex in sympathy with moving or cracked concrete, render, brick or wood.
  • Permanent, resilient, and durable, and resistant to ultraviolet (UV) radiation.
  • Protects concrete against frost attack, carbonation, sulphation and acid gases.
  • Water “soluble” – the material and equipment can be washed and cleaned with water.
  • High yielding, economical, non flammable, non toxic, user friendly and safe to use.

Uses

  • For use as an Anti-carbonation Protective, Flexible Coating (APFC) to cement and concrete.
  • Whenever stress, thermal or moisture movement is a problem at a crack, joint or within a concrete structure.
  • Tanking, roofing, weatherproofing and waterproofing applications.
  • The filling, sealing and waterproofing of cracks, joints, gaps and seals.
  • To protect reinforced concrete structures against freeze/thaw cycles, salt water, de-icing salts and corrosion of steel.
  • To protect concrete in extreme climatic conditions, high altitude and in severe weather.
  • Elastic requirements during cold weather or low temperature situations.
  • To protect concrete where chemical attack is prevalent such as in marine and offshore locations, chemical works, food processing factories, sewers and farms.
  • As a flexible adhesive to bond concrete, tiles, bricks and blocks to concrete, steel, wood, plastic, glass and other construction materials.
/by

Rockbond Flexible APFC Paint (RB FPA)

Product Information Sheet:

DESCRIPTION:

 

ROCKBOND FLEXIBLE (APFC) PAINT (RB FPA) is a two part, elastomeric system consisting of a cementitious dry pack and flexible acrylic latex.

The dry pack, ROCKBOND FLEXIBLE PAINT DRY PACK (RB FPA DP), is a mixture of a unique blend of cement powders, fillers and admixtures.

When the powder is mixed with the latex, ROCKBOND FLEXIBLE LATEX (RB FL), a grey paint is produced which is extremely adhesive, flexible and waterproof.

The material is an Anti-carbonation, Protective, Flexible Coating to concrete and cementitious materials.

The paint is ready to use, is supplied in 2kg/1.5 litre or 10kg/7.5 litre packs and has a shelf life of two years.

 

SPECIAL PROPERTIES:

 

*Available in white, and in a range of attractive colours.

*Can be used on all construction materials.

*Thixotropic, and will not slump, run or drip.

*Quickly and easily mixed and applied by brush, broom, roller or spray.

*Extremely adhesive, flexible and waterproof.

*Resilient and durable: will not crack or debond, and resistant to ultraviolet light.

*Permanent protective paint for concrete, steel, stone, brick, mortar, render and wood.

*Water “soluble” – equipment is quickly and easily washed and cleaned with water.

*High yielding, economical, non flammable, non toxic, odour free, user friendly and safe to use.

 

USES:

 

+To prevent carbonation and sulphation in cement and concrete.

+Waterproofing applications, and for the installation of damp proof courses.

+For use as an adhesive: to bond construction materials to steel and concrete.

+The filling, sealing and waterproofing of cracks, joints, gaps and seals.

+To protect structures from weather and weathering.

+To protect reinforced concrete against freeze/thaw cycles, de-icing salts,

deleterious aqueous solutions, acid gases and corrosion.

+Elastic requirements during cold weather or low temperature situations.

+To produce aesthetically pleasing and coloured finishes to repairs, buildings and

concrete structures.

/by

Rockbond Anti- Carbonation Coating (RB ACC)

Product Information Sheet:

Description

ROCKBOND ANTI-CARBONATION COATING (RB ACC) is a single pack,ready to use coating system. The material is water based, and contains a blend of pure acrylic resin polymers. The coating is extremely adhesive, flexible and waterproof, and can be applied by brush, roller or spray. The material is a white, anti-carbonation, flexible, protective, coating to concrete. It also provides a protective cover to cementitious materials, steel, stone, brick, wood and other construction materials. The coating is supplied in 6.65kg/5 litre packs and has a shelf life of 5 years..

Special Properties

  •  200 micron dry film of ROCKBOND ANTI-CARBONATION COATING is equivalent to 745mm of good quality concrete!
  • Normally, no need to prime.
  • Can be used on all construction materials: concrete, mortar, render, masonry, stone, steel, wood, plastic and glass.
  • Thixotropic: will not slump or drip.
  • Highly adhesive, flexible and durable.
  • Resistant to ultraviolet light and colour fast.
  • Microporous, damp proof, waterproof and weatherproof.
  • Resistant to chemical attack and acid gases.
  • Resistant to microbial growth, algae, fungi and mould.
  • Supplied in white, or available in a range of attractive colours.
  • Water “soluble” – equipment is quickly and easily washed and cleaned with water.
  • High yielding, economical, non flammable, non toxic, odour free, user friendly and safe to use.

Uses

  • To prevent carbonation and sulphation in concrete and cementitious materials.
  • Waterproofing applications to concrete structures, walls and roofs.
  • Waterproofing applications to brick, blocks, stone, rock and masonry.
  • Protective paint for concrete, steel, stone, brick, mortar and render.
  • To protect structures from the weather and weathering.
  • To protect reinforced concrete against freeze-thaw cycles, de-icing salts, aqueous solutions, acid gases and corrosion.
  • For elastic requirements over cracked surfaces and moving substrates.
  • To produce smooth, coloured and aesthetically pleasing finishes.
  • To produce uniform, coloured finishes to areas of concrete containing concrete repairs
/by

Rockbond Masonry Coating (RB MC)

Product Information Sheet:

To protect concrete structures from the weather and weathering. To produce smooth, coloured and aesthetically pleasing finishes. To produce uniform, coloured finishes to areas of concrete containing concrete repairs.

Description

Rockbond Masonry Coating (RB MC) is a single pack, ready to use coating system. The coating is water based and contains a blend of acrylic polymers. The latex is extremely adhesive, tough, waterproof and can be applied by brush, roller or spray. The coating provides a smooth, protective, durable and attractive cover to cementitious materials, concrete, stone, brick and other construction materials. The coating is supplied in 5 litre packs, and has a shelf life of 1 year.

Special Properties

  • Can be used on all construction materials based on cement and plaster.
  • Normally, no need to prime.
  • Thixotropic: will not slump or drip.
  • Highly adhesive, durable and colour fast.
  • Microporous, waterproof and weatherproof.
  • Resistant to ultra-violet light, chemical attack and acid gases.
  • Resistant to microbial growth, algae, fungi and mould.
  • Supplied in white, or available in a range of attractive colours.
  • Water “soluble” – equipment is quickly and easily washed and cleaned with water.
  • Economical, environmentally friendly, user friendly, non toxic, odour free and safe to use.

Uses

  • Can be used on cement, plaster, asbestos, breeze block, brick, stone, stucco and wood.
  • Waterproofing applications.
  • To protect concrete structures from the weather and weathering.
  • To protect cement based renders, brick and stone from frost attack.
  • To protect reinforced concrete against freeze-thaw cycles, de-icing salts, acid gases and corrosion.
  • To produce smooth, coloured and aesthetically pleasing finishes.
  • To produce uniform, coloured finishes to areas of concrete after concrete repairs.?
/by

Rockbond Cure (RB C)

Product Information Sheet:

Description

ROCKBOND CURE (RB C) is a specially formulated curing compound for use with ROCKBOND SPECIAL CONCRETE PRODUCTS. The compound is a fine dispersion of co polymer solids in water. When applied to the surface of cementitious materials, concrete or screed, by brush or by spray, the latex dries out to produce a clear, impermeable and waterproof film. The curing agent contributes to the curing of cement and concrete, and helps to prevent problems associated with dusting and drying out. The shrinkage, cracking and crazing of concrete is reduced or eliminated, and the strength and durability of the material is enhanced. The latex is supplied to order and
has a shelf life of 2 years.

Special Properties

  • Ready to use.
  • Conforms to ASTM C309, Type 1, liquid membrane forming compounds for the curing cementitious materials.
  • Complies with the Department of Transport Specification for Road and Bridge Works.
  • Economical and efficient – normally one coat application is necessary.
  • Permanent: does not degrade with time.
  • Weatherproof, waterproof, water based, solvent free, and free of deleterious substances.
  • High yielding, economical, non flammable, non toxic, odour free, user friendly and safe to use.

Uses

  •  To cure and maximise the strength of ROCKBOND SPECIAL CONCRETE PRODUCTS.
  • As a general purpose curing compound for conventional cementitious materials.
  • To increase the strength, and reduce the dusting, shrinkage, cracks and crazing of concrete.
  • To coat and waterproof brick, blocks, mortar, masonry, stone, render, cement and concrete.
  • To protect concrete and brick against frost, salt spray, de-icing salts, seawater, sulphates, aqueous chemicals and contaminated ground water.
  • To make shutters watertight and impermeable to the passage of water.
  • For use as an anti-carbonation coating.
  • For use as a debonding and a shutter release agent.
  • To produce clear and attractive finishes to concrete, stone, mortar, render and screed.
/by

Rockbond SBR Latex Concentrate (RB SBRLC)

Product Information Sheet:

Description

ROCKBOND SBR LATEX CONCENTRATE (RB SBRLC) is a polymer dispersion of styrene butadiene rubber in water.  The latex is used as an additive to enhance the all round performance of site batched cementitious materials: the flexibility, flexural, tensile, cohesive and adhesive strength of concretes, floor screeds, mortars and renders are all improved.  The latex also increases the impermeability, the waterproofing properties and the chemical resistance of the hardened material.  The latex is supplied to order and has a shelf life of 2 years.

Special Properties

  • Can be used as a primer for concrete: mix 1 part SBR latex to 3 parts water.
  • Formulated for use with site batched materials.
  • Reduces air entrainment, settlement and shrinkage.
  • Improves the adhesive strength of repair and flooring materials to brick and concrete.
  • Increases the flexural and tensile strengths of mortars and concretes.
  • Imparts flexibility to site batched repair materials and floors.
  • Increases the impermeability and resistance to chemical attack, and enhances durability.
  • Will not break down or re-emulsify.
  • Water based: mixing equipment and tools are easily washed and cleaned with water.
  • Economical, non flammable, non toxic, user friendly and safe to use.

Uses

    • To penetrate, consolidate, strengthen, seal and protect brick and concrete substrates.
    • To reduce suction, and to prime concrete and brick to increase the bond strength of repair materials.
    • For site batched flooring materials, and repair materials for floors.
    • To waterproof site batched concretes, mortars and renders.
    • To prevent frost attack to brick and concrete.
    • For site batched materials that require a greater tensile strength and flexibility.
    • For use as an adhesive when mixed with cement to bond cement, render, mortar, concrete, masonry, brick, stone, wood, plastic, glass and steel to other construction materials.
    • For use in chemically aggressive environments, such as marine defences, food factories, dairies, abattoirs and fertiliser plants and stores.
/by

Rockbond Flexible Latex (RB FL)

Product Information Sheet:

Description

ROCKBOND FLEXIBLE LATEX (RB FL) is a dispersion of flexible acrylic co polymer resin particles in water. When the liquid is mixed with cementitious materials, a flexible concrete, mortar or render is produced. Furthermore, the latex increases the adhesive strength, impermeability and the chemical resistance of the hardened material. The latex is ready to use, is supplied to order and has a shelf life of 2 years.

 

Special Properties

  • Formulated for use with site batched materials.
  • Produces site batched repair materials, concrete, renders and screeds that are flexible..
  • Can be used as a primer for concrete: mix 1 part latex to 3 parts water.
  • Improves the adhesion of repair materials to brick, stone, render and concrete.
  • Produces cementitious materials that are impermeable, waterproof and chemically resistant.
  • Water based: mixing equipment and tools are easily washed and cleaned with water.
  • High yielding, economical, non flammable, non toxic, odour free, user friendly and safe to use.

Uses

  • To produce Anti-carbonation Protective, Flexible Coatings (APFC) to cement and concrete.
  • To produce site batched, flexible concrete, grouts, mortars, screeds and renders.
  • Elastic requirements during cold weather or low temperature situations.
  • Whenever stress, thermal or moisture movement is a problem at a crack, in a joint or within a brick or concrete structure.
  • The filling, sealing and waterproofing of moving cracks, joints, gaps and seals.
  • To produce cementitious flexible adhesives to bond concrete, tiles, bricks and blocks to concrete, steel, glass, wood and other construction materials.
  • To prime concrete and brick substrates to increase the bond strength of repair materials.
  • Tanking, roofing, damp proofing, weatherproofing and waterproofing applications.
  • To protect concrete against frost attack, salt, carbonation, sulphation and acid gases.
/by

Rockbond Pure Acrylic Latex Concentrate (RB PALC)

Product Information Sheet:

Description

ROCKBOND PURE ACRYLIC LATEX CONCENTRATE (RB PALC) is a specially formulated, pure acrylic polymer resin dispersed in water and combined with water reducing agents and admixtures.  The latex, when added to the mix water, produces a hard polymer film, and improves the properties of hardened cementitious materials in general, and concrete repair and flooring materials in particular.  The latex is ready to use, supplied to order and has a shelf life of two years.

Special Properties

  • Can be used as a sealer, primer and bond aid for concrete and other construction materials (dilute the PAL concentrate: 1 part by weight of latex to 3 parts by weight of water).
  • Formulated for use with site batched materials.
  • Improves the adhesion of cementitious repair materials to brick, stone, render and concrete.
  • Increases the flexural and tensile strengths of mortars and concrete.
  • Wear resistant, reduces the permeability and chemical attack of cementitious materials and enhances durability.
  • Waterproof and permanent: will not break down or re-emulsify.
  • Water based – mixing equipment and tools easily washed and cleaned with water.
  • High yielding, economical, non flammable, non toxic, odour free, user friendly and safe to use.

Uses

    • To improve the performance of site batched cementitious materials.
    • For use in floor screeds and repair materials for floors and concrete.
    • For use in mortars for the laying and pointing of bricks and blocks.
    • For high strength or increased flexural and tensile strength applications.
    • For use in cementitious screeds and concrete placed in chemically aggressive environments.
    • Weatherproofing and waterproofing applications, and to prevent frost attack.
    • To penetrate, consolidate, strengthen and seal brick, stone, masonry and concrete substrates.
    • For use as a sealer, primer and bond aid to bond cementitious materials to other construction materials such as render, mortar, masonry, brick, stone, wood, plastic, glass and steel.
/by