Rockbond Lightweight (1800) Grout (RB 1800G)

ROCKBOND LIGHTWEIGHT (1800) GROUT (LW1800G) powder is a premixed, ready to use, low density grout powder. The compound consists of a blend of cement powders, shrinkage compensating agents, graded lightweight aggregates, and a combination of compatible admixtures.
The powder, when mixed with water, produces a lightweight, free flowing grout which is easily mixed, pumped and placed.
The grout is specially designed to be low in weight, and to penetrate and fill large volume voids that require a low density material.
The grout powder is packed in 25kg moisture proof, durable bags and has a shelf life of 2 years.
SPECIAL PROPERTIES:
Premixed and ready to use.
Quickly and easily mixed with water.
Can be designed and supplied to produce a density of between 750 to 1800kg/m3.
Portland cement based, shrinkage compensated, microsilica enhanced.
The grout will not segregate or bleed, is readily pumpable and self compacting.
Excellent insulator, and a poor conductor of heat and sound.
Resistant to fire, non flammable and will not give off toxic gases.
Contains no chlorides, high alumina cement or deleterious substances.
High yielding and economical to use.
High yielding, economical, non flammable, non toxic, odour free, user friendly and safe to use.

USES:
Whenever a low weight, high flow material is required.
For the installation of lightweight concrete structures.
Compatible repairs to lightweight cementitious materials, concrete, bricks and blocks.
For use as a large, lightweight volume void filler.
To form and manufacture low density, precast concrete products and lightweight artefacts.
To fill areas that require a low heat material.
To protect steel and concrete structures from fire and heat.
To thermally insulate buildings and walls on the inside or outside.
As an insulating infill around pipes and ducts.
To minimise condensation on walls and ceilings.
To acoustically insulate rooms or areas to reduce noise and sound.

/by

Rockbond Abrasion Resistant Mortar (RB ARM)

ROCKBOND ABRASION RESISITANT MORTAR (RB ARM) powder is a premixed, ready to use, polymer modified cementitious mortar power. The compound contains a unique blend of cements, graded bauxite sands, stainless steel fibres and a union of admixtures. The powder, when mixed with water, produces a steel reinforced, acrylic modified, cementitious mortar which quickly hardens to produce a strong bonding, high strength, impermeable and wear resistant material. The mortar is specially designed for use in mechanically aggressive environments to withstand heavy loading, impact and abrasion. The powder is packaged in 25kg moisture proof durable bags has a shelf life of 5 years.

SPECIAL PROPERTIES:
Portland cement based, acrylic polymer modified, steel reinforced and microsilica enhanced.

Quickly and easily mixed, placed, worked and finished.
The mortar is thixotropic, cohesive, set accelerated, anti slump, and has an attractive finish.
Formulated to produce an exceptionally dense, strong, impermeable and durable material.
Incorporates graded bauxite sands which are resistant to mechanical wear and tear.
Steel reinforced: hard wearing, resistant to point loads, impact and abrasion.
Tough: high tensile strength, durable to cyclic and vibrational stresses.
Shockproof and shatterproof: stays in place after continual exposure to impact and collision.
High yielding, economical, non flammable, non toxic, odour free, user friendly and safe to use.

USES:
To repair and protect concrete structures and surfaces from mechanical attack.
To protect concrete surfaces in heavy engineering and railway workshops and shipyards.
For use in heavy and massive machine assembly plants, factories and warehouses.
In confined spaces where fork lift traffic and heavy vehicles collect and maneuver.
On roads and areas where the traffic is steel wheeled or moves on caterpillars.
To repair and protect concrete against loading buckets, shovels and grabs.
Applied as a protective render to kerbs, barriers, walls, pillars, and posts.
To protect concrete from power wash, running water, floating debris, scour, sand and stones.
To produce non slip, non skid surfaces to steps, ramps, paths and roadways.
Patch repairs to heavy duty floors.

/by

Rockbond Abrasion Resistant Mortar (RB ARM)

ROCKBOND ABRASION RESISITANT MORTAR (RB ARM) powder is a premixed, ready to use, polymer modified cementitious mortar power. The compound contains a unique blend of cements, graded bauxite sands, stainless steel fibres and a union of admixtures. The powder, when mixed with water, produces a steel reinforced, acrylic modified, cementitious mortar which quickly hardens to produce a strong bonding, high strength, impermeable and wear resistant material. The mortar is specially designed for use in mechanically aggressive environments to withstand heavy loading, impact and abrasion. The powder is packaged in 25kg moisture proof durable bags has a shelf life of 5 years.

SPECIAL PROPERTIES:
Portland cement based, acrylic polymer modified, steel reinforced and microsilica enhanced.

Quickly and easily mixed, placed, worked and finished.
The mortar is thixotropic, cohesive, set accelerated, anti slump, and has an attractive finish.
Formulated to produce an exceptionally dense, strong, impermeable and durable material.
Incorporates graded bauxite sands which are resistant to mechanical wear and tear.
Steel reinforced: hard wearing, resistant to point loads, impact and abrasion.
Tough: high tensile strength, durable to cyclic and vibrational stresses.
Shockproof and shatterproof: stays in place after continual exposure to impact and collision.
High yielding, economical, non flammable, non toxic, odour free, user friendly and safe to use.

USES:
To repair and protect concrete structures and surfaces from mechanical attack.
To protect concrete surfaces in heavy engineering and railway workshops and shipyards.
For use in heavy and massive machine assembly plants, factories and warehouses.
In confined spaces where fork lift traffic and heavy vehicles collect and maneuver.
On roads and areas where the traffic is steel wheeled or moves on caterpillars.
To repair and protect concrete against loading buckets, shovels and grabs.
Applied as a protective render to kerbs, barriers, walls, pillars, and posts.
To protect concrete from power wash, running water, floating debris, scour, sand and stones.
To produce non slip, non skid surfaces to steps, ramps, paths and roadways.
Patch repairs to heavy duty floors.

/by