Product Information Sheet:

Description

ROCKBOND EPOXY BONDING AGENT (RB EBA) is a specially formulated two part, solvent free, epoxy resin system which consists of a hardener and a base resin which is filler free. When the hardener is mixed with the base component, a free flowing epoxy grout is produced which quickly hardens and to produce a strong bonding material. The compound is used to bond cementitious materials to steel and other construction materials. The resin is supplied in 1kg/1 litre packs and has a shelf life of 1 year.

Special Properties

  • Pre batched, pre packed and ready to use.
  • Does not contain phenolic accelerators and is solvent free.
  • Quickly and easily mixed and applied by brush, broom or roller.
  • Low viscosity, high workability and free flowing.
  • Develops a high early adhesive strength.
  • Can be used at low temperatures down to 0ºC
  • Adheres strongly to most construction materials: cement, mortar, concrete, brick, stone, masonry, steel, wood, plastic and glass.
  • Can be used to bond wet or cured concrete to steel and other building materials.
  • Forms a strong permanent bond to concrete, steel, wood and most construction materials.
  • Impermeable and waterproof: resistant to aqueous solutions, acids, oils and organic solvents.
  • Water “soluble” – materials and equipment can be washed and cleaned with water.

Uses

  •  To bond wet concrete to cast concrete, steel and other construction materials.
  • To produce a high strength, permanent, waterproof bond to concrete and steel.
  • To bond precast concrete, stone, bricks, blocks and wood to concrete and steel.
  • For use as a general purpose adhesive during building and construction.
  • To form a quick bond between construction materials at low temperatures.
  • To fill, seal and protect cracked concrete and porous cementitious surfaces.
  • To install wearing surfaces to weak and friable concrete floors, paths and roadways.
  • To waterproof and protect concrete against frost, aqueous solutions and chemical attack.

Product Information Sheet:

DESCRIPTION:

ROCKBOND ZINC RICH STEEL PRIMER (RB ZRSP) is a specially formulated, single pack, epoxy
resin, zinc based primer for steel. When the primer is painted onto steel, a grey, matt, zinc rich, anti
corrosion, galvanic coating is produced which protects steel against oxidation, corrosion and chemical
attack. The resin is supplied in 8.5kg/5 litre packs and has a shelf life of 1 year.

SPECIAL PROPERTIES:

* One pack system: quickly and easily applied by brush, spray or roller.
* Low viscosity, low workability and free flowing.
* Quick drying, strong and bonds fast to steel and other metal surfaces.
* Impermeable, waterproof, weatherproof, durable and provides long term protection.
* Resistant to aqueous solutions, acids, oils and most organic solvents.
* Suitable and compatible for use with Rockbond Concrete Repair and Protection Products.
* High yielding, economical and safe to use.

USES:

+ Brush or spray apply to steel to protect steel, steel reinforcing, steel bars and rods against
moisture, oxygen, chlorides and acid gas attack.
+ To chemically protect steel in chemically aggressive environments.
+ To protect steel against de-icing salts and steel situated in marine locations.
+ For treating steel reinforced concrete located in dairies, chemical works, tunnels and sewers.
+ To protect steel structures, beams, tanks, plates and pipes from chemical attack and corrosion.
+ For use on steel reinforced concrete, concrete repairs and in new construction.
+ To repair and protect new steel, or damaged galvanised steel surfaces.
+ To bond wet and cast cementitious mortars, grouts, floor screeds and concrete to steel.

Product Information Sheet:

To protect steel from corrosion in chemically aggressive environments for durable reinforced concrete in chemical works, tunnels and sewers to protect steel against de-icing salts and seawater in marine locations.

Description

Rockbond Epoxy Steel Primer (RB ESP) is a specially formulated two part, solvent based, epoxy steel primer system which consists a hardener and a base resin. When the hardener is mixed with the base component, a free flowing epoxy coating is produced which hardens and protects steel against corrosion and chemical attack. The resin is supplied in 1.2kg/1 litre two part packs and has a shelf life of 1 year.

Special Properties

  • Pre batched, pre packed and ready to use.
  • Quickly and easily mixed and applied by brush, broom or roller.
  • Low viscosity, high workability and free flowing.
  • Quick drying, strong and bonds fast to steel and other metal surfaces.
  • Impermeable, durable and provides long term protection.
  • Can be used to bond wet or cured concrete to steel and other construction materials.
  • Resistant to chemicals, aqueous solutions, acids, oils and organic solvents.

Uses

  • Brush or spray applied to steel reinforcing to protect steel against chemicals, chloride attack, moisture, oxygen and acid gases.
  • To chemically protect steel in chemically aggressive environments.
  • To protect steel against de-icing salts and in marine locations.
  • For reinforced concrete in dairies, abattoirs, chemical works, tunnels and sewers.
  • For use on concrete, concrete repairs and in new construction.
  • Protective coating to new or freshly prepared steel, steel reinforcing and steel structures.
  • To bond wet cementitious mortars, grouts, floor screeds and concrete to steel.