Rockbond Epoxy Mortar (RB EM)

Load bearing applications: under heavy machine baseplates, structural baseplates, bridge bearing
seats, crane rail tracks, generators and compressors. As a heavy duty floor screed to repair damaged
and broken concrete surfaces. To protect concrete surfaces in chemically aggressive environments
such as food factories, farms, abattoirs, dairies and breweries.

Description

ROCKBOND EPOXY MORTAR (RB EM) is a specially formulated, three part epoxy resin system
which consists of a base resin, hardener and filler. When the hardener is mixed with the base resin
and filler, a non flow mortar is produced which cures to produce a quick, strong, fast bonding material
for use in concrete repairs and on concrete floors. The mortar is supplied in 5.2kg/2.5 litre and
20.8kg/10 litre packs, and has a shelf life of 1 year.

Special Properties

  • Pre batched, pre packed and ready to use.
  • Quickly and easily mixed, worked, placed and finished.
  • Quick strength development: will resist traffic and loading at an early age.
  • Bonds fast to cement, concrete, brick, masonry, rock and steel.
  • High strength: will resist heavy static, dynamic and cyclic loading.
  • Resistant to aqueous solutions, acids, oils and organic solvents.

Uses

  • For the repair and protection of reinforced concrete structures.
  • To patch repair cracks, voids, holes and gaps in concrete, masonry and steel.
  • The filling and sealing of voids, and general purpose non flow epoxy mortar applications.
  • High strength structural repairs to concrete.
  • Load bearing applications: under heavy machine baseplates, structural baseplates, bridge bearing seats, crane rail tracks, generators and compressors.
  • As a heavy duty floor screed to repair damaged and broken concrete surfaces.
  • To protect concrete surfaces in chemically aggressive environments such as food factories, farms, abattoirs, dairies and breweries

Rockbond Epoxy Timber Grout (RB ETG)

Product Information Sheet:

ROCKBOND EPOXY TIMBER GROUT (RB ETG) is a specially formulated, three part, epoxy resin grout system which is composed of a hardener, base and filler. When the hardener component is mixed with the base and filler, a free flowing, dark green grout is produced, which quickly hardens to produce a strong bonding, durable material which is compatible and similar to the properties of wood. The compound is used to fill, seal, repair and protect both softwood and hardwood timber. The resin is supplied in 4.2kg/2.5 litre packs and has a shelf life of 2 years.

 

Special Properties

  • Pre batched, pre packed, and ready to use.
  • Quickly and easily mixed to give an excellent flowing consistency for ease of application.
  • Behaves like hardwood: can be sanded and drilled.
  • Forms a strong permanent bond to wood and other construction materials.
  • Can be used for both cosmetic and structural repairs to wood and timber.
  • Waterproof, weatherproof and resistant to frost.
  • Resistant to aqueous solutions, chemicals, acids and oils.
  • High yielding, economical, non toxic, odour free, user friendly and safe to use.

Uses

  • For flowing repairs to seal and protect old and new wood.
  • To fill cracks, voids, holes, gaps and joints in wood and timber structures.
  • To replace and repair damaged, cracked or rotten timber.
  • For flowing repairs to wooden surfaces, walls, furniture and floors.
  • To restore the structural integrity of wooden frames, beams, joists, pillars and posts.
  • To produce attractive and ascetically pleasing finishes to floors and wooden surfaces.

Rockbond Epoxy Timber Mortar (RB ETM)

Product Information Sheet:

ROCKBOND EPOXY TIMBER MORTAR (RB ETM) is a specially formulated, two part, epoxy resin mortar system which consists of a hardener and a base. When the hardener component is mixed with the base, a wood pigmented putty is produced which quickly hardens to produce a strong bonding, durable material which is compatible and similar to wood. The compound is used to fill, seal, repair and protect both softwood and hardwood timber. The resin is supplied in 1.8kg/2 litre packs and has a shelf life of 2 years.

 

Special Properties

  • Pre batched, pre packed, components are colour coded, and ready to use.
  • Quickly and easily mixed, and develops an excellent putty consistency ease of application.
  • Can be moulded, shaped and formed, and applied by trowel, float or gloved hand.
  • Behaves like wood: can be sanded, planed, stained and drilled.
  • Forms a strong permanent bond to wood and other construction materials.
  • Can be used for both cosmetic and structural repairs to wood and timber.
  • Microporous, weatherproof, waterproof, damp proof and resistant to frost.
  • Durable and inert: resistant to aqueous solutions, chemicals, acids and oils.
  • High yielding, economical, non toxic, odour free, user friendly and safe to use.

Uses

  • To repair, seal and protect old and new wood.
  • To fill cracks, voids, holes, gaps and joints in wood and timber structures.
  • To replace and repair damaged, cracked or rotten timber.
  • Patch repairs to wooden surfaces, walls, furniture and floors.
  • To restore the structural integrity of wooden frames, beams, joists, pillars and posts.
  • To produce attractive and ascetically pleasing finishes to floors and wooden surfaces.

Rockbond Anti Graffiti Primer (RB AGP) and Coating (RB AGC)

Product Information Sheet:

Can be pigmented to give a range of colours. Resistant to solvents and chemical attack. Formulated to withstand continual washing without ageing or deterioration to protect concrete structures and buildings against graffiti nuisance for use on bus shelters, toilets, bollards, barriers, signs and various street furniture.

Description

Rockbond Anti Graffiti Coating (RB AGC) is an anti graffiti, moisture cured polyurethane, coating designed to protect brick, concrete and other surfaces from graffiti attack. The material is a three coat application system and, when fully cured, provides a clear, dense, waterproof and impermeable barrier to all types of ink, paint and solvent based graffiti. The system is ready to use, is supplied in 5 litre packs, and has a shelf life of 2 years.

Special Properties

  • Quickly and easily applied by brush, broom, roller or spray.
  • Can be used on all construction materials: concrete, mortar, render, masonry, rock, stone, steel, wood and plastic.
  • Strong, highly adhesive and durable.
  • Designed to give a clear gloss or clear matt finish.
  • Can be pigmented to give a range of colours.
  • Resistant to solvents and chemical attack.
  • Formulated to withstand continual washing and cleaning without ageing or deterioration.
  • High yielding, economical, non toxic, user friendly and safe to use.

Uses

  • To protect concrete structures and buildings against graffiti nuisance.
  • For use on bus shelters, toilets, bollards, barriers, signs and various street furniture.
  • To give an attractive and ascetically pleasing clear or coloured finish to structures, buildings, walls and surfaces.?

Rockbond Resin Tanking System (RB TS)

Product Information Sheet:

ROCKBOND RESIN TANKING SYSTEM (RB RTS) is a specially formulated two part, solvent free, epoxy coating system which consists of a hardener and a base. When the hardener component is mixed with the base, a grey liquid resin is produced which quickly hardens to produce a strong bonding, impermeable and chemically resistant coating to concrete and steel. The compound is used to tank and waterproof cementitious materials, concrete, brick and other porous surfaces. The Resin Tanking System protects concrete against chemical attack. The system is supplied in 5kg/5 litre packs and has a shelf life of 2 years.

Special Properties

  • Pre batched, pre packed and ready to use.
  • Supplied in standard grey, but can be supplied in a range of attractive colours.
  •  Water dispersible, and free from toxic organic solvents.
  • Quickly and easily mixed and applied by brush, broom, roller or spray.
  • Forms a strong permanent bond to wood, concrete, stone, brick, steel, glass and other construction materials.
  • Surfaces are anti-slip, clean, hygienic and washable.
  • Non hazardous: formulated to BS 6920 for use in potable water environments.
  • Impermeable, waterproof, weatherproof and frost proof.
  • Resistant to aqueous solutions, chemicals, acids, diesel, oils, hydraulic fluids and solvents.
  • Water “soluble” – resin and equipment can be washed and cleaned with water.
  • High yielding, economical, non toxic, user friendly and safe to use.

Uses

  • To tank and waterproof brick, block, masonry, stone, cementitious materials and concrete.
  • To seal water retaining structures, reservoirs, tanks, pools, pipes and sewers.
  • Tanking, roofing, waterproofing and weatherproofing applications.
  • To waterproof brick and concrete foundations, underground structures, retaining walls, linings, cellars, and tunnels.
  • To fill, seal and protect cracked concrete, brick and porous cementitious surfaces.
  • To protect concrete in chemically aggressive environments such as marine defences,food processing factories, chemical works, abattoirs, dairies, breweries, sewers and farms.
  • To produce attractive and ascetically pleasing finishes to concrete and concrete structures.

Rockbond Anchor T Resin Grout (RB ATRG)

Product Information Sheet:

ROCKBOND ANCHOR T RESIN GROUT (RB ATRG) is a specially formulated two part, epoxy resin system, which consists of a base resin and hardener. When the hardener is mixed with the base resin, a thixotropic paste is produced which hardens to produce a strong bonding adhesive for the installation of anchor bolts and holding down systems in both horizontal and soffit situations. The grout is supplied in 600g/400ml packs and has a shelf life of 1 year.

Description

ROCKBOND ANCHOR T RESIN GROUT (RB ATRG) is a specially formulated two part, epoxy resin system, which consists of a base resin and hardener. When the hardener is mixed with the base resin, a thixotropic paste is produced which hardens to produce a strong bonding adhesive for the installation of anchor bolts and holding down systems in both horizontal and soffit situations. The grout is supplied in 600g/400ml packs and has a shelf life of 1 year.

Special Properties

  • Pre batched, pre packed and ready to use.
  • Quickly and easily mixed and applied.
  • Thixotropic: will not run, sag, slump, sink once in place.
  • For a low viscosity, free flow anchor resin, use ROCKBOND ANCHOR FF RESIN GROUT.
  • Bonds fast to cement, concrete, brick, masonry, stone, rock and steel.
  • Resistant to chemicals, aqueous solutions, acids, oils and organic solvents.

Uses

  • For non flow horizontal and soffit fixings in concrete, brick, masonry, rock and stone.
  • High strength structural fixings of all types.
  • Installation of reinforcing starter bars, dowels, bolts and rods.
  • Anchor systems for cables, bolts, plates and retaining walls.
  • Fixings for scaffolding, crash barriers, safety rails and fences.
  • For use as a general purpose adhesive during building and construction.

Rockbond ResinTop Primer (RB RTP)

Product Information Sheet:

Description

ROCKBOND RESINTOP PRIMER (RB RTP) is a specially formulated two part, water based, epoxy resin system which consists of a hardener and a base, and is filler free. When the hardener is mixed with the base component, a free flowing epoxy grout is produced which quickly hardens to produce a clear, impermeable, strong bonding, high strength material. The compound is used to seal and strengthen cementitious and brick surfaces, and to bond various construction materials to concrete and steel. The resin is supplied in 4.2kg/4.5 litre packs and has a shelf life of 1 year.

 

Special Properties

 

  • Pre batched, pre packed and ready to use.
  • Water based: does not contain phenolic accelerators, and is solvent free.
  • Quickly and easily mixed and applied by roller, brush or broom.
  • Low viscosity, low workability, free flowing and runny.
  • Develops a high early adhesive strength, and can be used at temperatures as low as 5ºC
  • Forms a strong permanent bond to concrete, steel, wood and most construction materials
  • Impermeable and waterproof: resistant to aqueous solutions, acids, oils and organic solvents.
  • Water “soluble” – materials and equipment can be washed and cleaned with water.
  • High yielding, economical, non toxic, odour free, user friendly and safe to use.

 

Uses

 

  • To fill, seal and protect cracked and porous cementitious surfaces, concrete and brick.
  • To install wearing surfaces to weak and friable concrete floors, paths and roadways.
  • To bond wet or cured concrete to steel and other construction materials.
  • To produce a high strength, permanent, waterproof bond to concrete and steel.
  • To bond precast concrete, stone, bricks, blocks and wood to concrete and steel.
  • For use as a general purpose adhesive during building and construction.
  • To waterproof and protect concrete and brick surfaces against frost, aqueous solutions and chemical attack.
  • To bond and produce decorative aggregate finishes to masonry, concrete paths and drives.

Rockbond Epoxy (LM) Mortar (RB ELMM)

Product Information Sheet:

ROCKBOND EPOXY (LM) MORTAR (RB ELMM) is a specially formulated, three part, epoxy pitch mortar system which consists of a base, hardener and fine filler. When the three components are mixed, a black thixotropic paste is produced which cures to produce a strong and flexible material which is resilient to movement, shock and vibration. The epoxy mortar is used in situations where a low modulus material is required. The mortar is supplied in 20.2kg/10 litre packs and has a shelf life of 2 years.

Description

 

ROCKBOND EPOXY (LM) MORTAR (RB ELMM) is a specially formulated, three part, epoxy pitch mortar system which consists of a base, hardener and fine filler. When the three components are mixed, a black thixotropic paste is produced which cures to produce a strong and flexible material which is resilient to movement, shock and vibration. The epoxy mortar is used in situations where a low modulus material is required. The mortar is supplied in 20.2kg/10 litre packs and has a shelf life of 2 years.

Special Properties

 

  • Pre batched, pre packed, and ready to use.
  • Quickly and easily mixed, worked, placed and finished.
  • Forms a strong bond to concrete, steel, wood and other construction materials.
  • Cures to produce a flexible resilient material which is strong and durable.
  • Flexes in sympathy with moving substrates, surfaces, joints and voids.
  • Remains tensile at temperatures below 0ºC.
  • Resistant to aqueous solutions, chemicals, acids and oils.
  • Economical, user friendly and safe to use.

 

Uses

 

  • For use in situations where a strong bonding, flexible material is required.
  • To fill cracks, voids, holes and gaps in concrete and steel exposed to movement due to stress and vibration.
  • As a joint filler in concrete floors, slabs, precast concrete and steel.
  • For use on steel and wooden surfaces and floors subjected to tension and flexion.
  • Whenever stress, thermal or moisture movement is a problem in a crack, joint or on steel or wooden structures.
  • As a flexible tile adhesive for bedding and bonding tiles to steel and wood.
  • Patch repairs to wooden surfaces, walls, furniture and floors.
  • Elastic requirements during cold weather or low temperature situations.

Rockbond Epoxy Lightweight Mortar (RB ELWM)

Product Information Sheet:

ROCKBOND EPOXY LIGHTWEIGHT MORTAR (RB ELWM) is a specially formulated, three part epoxy mortar system, which consists of a base, hardener and a low density filler. When the three components are mixed, a lightweight resin mortar is produced which is high building, non slumping, and easily worked, placed and finished. The material sets quickly to produce a strong bonding, durable mortar which is used to repair vertical and soffit concrete, and to fill large volume voids. The mortar is supplied in 3.5kg/2.5 litre or 14kg/10 litre packs and has a shelf life of 2 years.

Description

ROCKBOND EPOXY LIGHTWEIGHT MORTAR (RB ELWM) is a specially formulated, three part epoxy mortar system, which consists of a base, hardener and a low density filler. When the three components are mixed, a lightweight resin mortar is produced which is high building, non slumping, and easily worked, placed and finished. The material sets quickly to produce a strong bonding, durable mortar which is used to repair vertical and soffit concrete, and to fill large volume voids. The mortar is supplied in 3.5kg/2.5 litre or 14kg/10 litre packs and has a shelf life of 2 years

 

Special Properties

 

  • Pre batched, pre packed, and ready to use.
  • Quickly and easily mixed, worked, placed and finished.
  • Thick sections can be built up on vertical and soffit surfaces in one application.
  • Early strength gain reduces time on site waiting for the material to “go off”.
  • Adheres strongly to all construction materials: cement, mortar, concrete, masonry, brick, stone, steel, wood, plastic and glass.
  • Weatherproof, waterproof, impermeable, and resistant to Ultra Violet radiation.
  • Protects concrete against frost attack, carbonation, sulphation and acid gases.
  • Resistant to aqueous solutions, chemicals, acids and oils.
  • Can be pigmented to colour match the surrounding concrete, brick or stone.
  • High yielding and economical to use.

 

 

Uses

  • In high build situations for use in one application: 50mm or more on soffit surfaces, 75mm or more on vertical surfaces.
  • Structural repairs to vertical and soffit concrete.
  • Repairs to cementitious materials, concrete, masonry, stone, bricks and blocks.
  • To patch repair and fill cracks, voids, holes and gaps in concrete and steel.
  • Applied as a render to concrete, stone, brick, wood and most construction materials.
  • Whenever a light weight material is required.
  • For use as a large volume void filler.
  • As a joint filler in concrete floors, between slabs, precast concrete and steel.

Rockbond Crack Injection T Grout (RB CITG)

Product Information Sheet:

Description

ROCKBOND CRACK INJECTION T GROUT (RB CITG) is an unique two part, thixotropic, epoxy resin system which consists of a hardener and a base resin. When the hardener is mixed with the base component, a thixotropic paste is produced which gradually hardens to produce a white, strong bonding, flexible adhesive used for the filling and sealing of cracks, gaps and voids. The material is also used to bond concrete to steel, and many other construction materials, including stone, brick, plastic, glass and wood. The resin is supplied in 480g/400ml packs and has a shelf life of 1 year.

.

Special Properties

  • Pre batched, pre packed and ready to use.
  • Supplied in 480g/400ml packs with cartridge sleeves, nozzles and back plates: use a ROCKBOND RESIN INJECTION GUN 400ml (RB RIG400) to inject the grout.
  • Quickly and easily mixed and applied.
  • Thixotropic, low pressure paste: flows, but will stay in place when the pressure is released.
  • Alternative low viscosity, free flow form available: ROCKBOND CRACK INJECTION FF GROUT
  • Can be accelerated for quick injection work, or for use at low ambient temperatures.
  • Forms a strong permanent bond to concrete, brick, steel, wood and most construction materials.
  • Resistant to chemicals, aqueous solutions, acids, oils and organic solvents.

Uses

  • To penetrate, fill and seal cracks in concrete, rock, brick, block and masonry.
  • As a flexible adhesive to fill and seal gaps, joints and spaces between precast concrete.
  • To bond construction materials to concrete, steel, stone, brick, plastic, glass and wood.
  • To produce a high strength, permanent, impermeable, weatherproof and waterproof bond.
  • For use as a general purpose flexible adhesive during building and construction.
  • To fill, seal and protect cracked concrete and porous cementitious surfaces.
  • To install wearing surfaces to weak and friable concrete floors, paths and roadways.
  • To protect concrete against chemical attack.